Dutch municipal WWTP achieves 25% dry solids reduction with Drylet’s Aqua Assist
Annual savings on sludge handling costs have been confirmed in an eight months full scale trial
Sneek, the Netherlands
The pilot program at WwTW Halsteren, a low-load biological treatment plant in the Netherlands, resulted in a 25% reduction in WAS (Waste Activated Sludge) production, from 200 ton dry solids per annum to 155 ton dry solids per annum. MLSS could be increased from 2.7 g/l up to 3.7 g/l without any process consequences. The effluent quality remained good and stable throughout the six-month pilot period. Ultimately, the cost of using Aqua Assist ended up being significantly lower than the annual savings on sludge handling costs.
“By reducing the WAS production, the water authority is executing on its goal to reduce waste production while achieving economic gains in operating costs,” said Hans Mollen, senior process technologist at Waterschap Brabantse Delta. “Our collaboration with Brightwork, together with Drylet’s technology and expertise, gave us the results we wanted to see,” he added.
Drylet’s Aqua Assist solution consists in the regular dosing of engineered, microporous, and dry-to-the-touch biocatalysts, ranging 200 to 600 microns in size and inoculated with a specific proprietary microbial consortium, directly into the activated sludge reactor. The biocatalysts’ retention time in the reactor is equal to the sludge retention time. The particles protect the microbes from predators, bacteriophages and/or toxins, and act as nurseries for the biomass to double every 2 – 3 hours under more or less optimal circumstances, once the material is dosed into the activated sludge basin. Studies have revealed that dosing Aqua Assist initiates a shift in bacteria species which favour the process conditions for wastewater treatment.
WwTW Halsteren has a capacity of 12,700 pe and a maximum hydraulic capacity of 525 m3/h. WAS is thickened and stored prior to transport to a central sludge digesting facility. To analyze the effectiveness of Aqua Assist, data was collected throughout the trial and compared with the process data from 2017, a year with similar process operations.
The dosing started early June 2019 and occurred continuously until the end of November 2019. Twice a week, a fixed amount of 2.1 kg (the equivalent of a 600-g daily dose) of Aqua Assist was manually added in the return sludge flow mixing with the feed water — this caused an ideal mixing of the material. The trial demonstrated that the MLSS concentration could be increased from 2.7 g/l up to 3.7 g/l without any impact on SVI, effluent quality and plant operation stability. The objective to reduce WAS production was achieved with a dry solids reduction of around 25%. As a result, a positive business case was demonstrated, and a follow-up of the project was initiated.
The full case study is available here
Drylet is an award-winning bioremediation technology company whose proprietary biocatalysts optimize biosolids reduction and biogas generation in wastewater treatment facilities, industrial wastewater lagoons, concentrated animal operations, and waste-to-energy installations. Drylet offers a cost-effective and zero-footprint solution to biosolids accumulation, boosting mass-to-gas conversion and energy revenue, while reducing environmental impacts and streamlining regulatory compliance. The company is headquartered in Houston, Texas, with offices in California and in Europe. For more information, visit www.drylet.com.
Brightwork is reliable service partner in water and waste water treatment. Brightwork’s core driver is to make our clients processes perform better. A team of dedicated experts is focusing on water and waste water treatment, water reuse, sludge and energy management for both municipal and industrial parties.
Brightwork offers a range of water treatment products, services and monitoring tools. All these products are carefully tested and successfully implemented for various applications.